By Carlos E Antillano · Last updated: October 23, 2026 · LaguioleEnAubracShop.com, the authorized USA Laguiole en Aubrac distributor
The short answer
Both are genuine French makers from the Aubrac, and either is a sound buy. Forge de Laguiole, founded in 1987 in the village of Laguiole itself, is the best-known name: a larger workshop with designer collaborations (Philippe Starck designed its factory), forged T12 steel, and a place among the makers listed under the "Couteau de Laguiole" geographical indication. Laguiole en Aubrac, founded in 1992 in nearby Espalion, works the other way: each piece is made from start to finish by one artisan, in Sandvik 12C27 stainless steel, with a very wide choice of handle materials and a certificate in every box.
The practical difference: choose Forge de Laguiole if you want the village name on the blade and a designer edition. Choose Laguiole en Aubrac if you want one artisan's piece, a wider choice of handles, and lower prices for comparable models in the US.
A word about who is telling you this: we are the authorized USA Laguiole en Aubrac distributor. We do not sell Forge de Laguiole. Facts about Forge come from its own descriptions and its US dealers, and its prices below are what a US dealer listed in October 2026. Check current prices with an authorized Forge seller.
At a glance
| Laguiole en Aubrac | Forge de Laguiole | |
|---|---|---|
| Founded | 1992 | 1987 |
| Where made | Espalion, Aveyron, in the Aubrac region of France | Laguiole village, Aveyron, France |
| Who makes each piece | One artisan, start to finish; up to 216 operations depending on the model | A workshop of more than 100 people, with specialist cutlers, handle makers and engravers |
| Blade steel | Sandvik 12C27 stainless steel (Damascus blades excepted) | Forged T12 steel from the French steelworks Bonpertuis |
| Signature detail | Hand chasing along the spine; on DeLuxe No 6–9 corkscrews, the number tells you which artisan made the bee | Spring and bee forged in one piece on its Tradition knives; designer editions by Philippe Starck and others |
| Origin marks | LOG (Laguiole Origine Garantie) on some pieces; the workshop holds the EPV living-heritage label (it is not marked on the products) | Listed operator of the "Couteau de Laguiole" geographical indication; EPV living-heritage label |
| Classic 12 cm (4¾") pocket knife, US | From $169.95 | About $209–$249 at a US dealer |
| Sommelier corkscrew, US | From $139.95 | About $279 for a wood handle at a US dealer |
| 6-piece steak knife set, US | From $249.95; smooth, never serrated | About $894 for horn-tip handles at a US dealer |
| In the box | French oak box and certificate with every piece | Varies by model; ask the seller |
First, both of these are real
The comparison most buyers need is not Laguiole en Aubrac against Forge de Laguiole. It is either of them against the $25 "Laguiole" knife from an unnamed factory. "Laguiole" is a style of knife, and for decades the name was not protected for knives, which is why so many mass-produced knives carry it.
On October 18, 2024, France's INPI approved the "Couteau de Laguiole" geographical indication, which covers knives made to its rules in 24 communes of northern Aveyron by listed makers. Even so, the maker's name on the blade is still the first thing to check. If you are not sure the knife in front of you is genuine, start with our guide on how to spot a fake Laguiole.
Where they come from
Forge de Laguiole was founded in 1987 to bring knife-making back to the village of Laguiole, where the knife was born in the 19th century. Its factory on the road into the village, designed by Philippe Starck, is open to visitors, and the brand has worked with designers such as Starck, Andrée Putman and Ora Ïto on special editions. It is one of the six makers listed by INPI as operators of the "Couteau de Laguiole" geographical indication.
Laguiole en Aubrac was founded in 1992 in Espalion, a town on the Lot river at the foot of the Aubrac plateau, a short drive from Laguiole. It is built around a single idea: one artisan makes each piece from beginning to end, and the finished knife, corkscrew or steak set leaves the workshop with a certificate. Every item is unique and fully handcrafted.
How they are made
At Forge de Laguiole, blades are cut from T12 steel, heated, forged under heavy pressure, hardened, then sharpened and polished by hand. On its Tradition knives, the spring and bee are forged as one piece rather than soldered. The work is shared between specialists: handle makers, assemblers and a team of engravers who hand-chase the spines. That organization lets the workshop produce on the order of a hundred knives a day while keeping the hand finishing.
At Laguiole en Aubrac, one artisan carries the piece through every stage, from fitting the handle to assembling the spring and finishing the spine, in up to 216 operations depending on the model. On the DeLuxe No 6, No 7, No 8 and No 9 corkscrews, the number even tells you which artisan made the bee. The blades are Sandvik 12C27 (Damascus blades excepted), a Swedish stainless steel widely used in quality knives for its edge and its resistance to corrosion.
Neither approach is wrong. A shared workshop gives consistency and lets each specialist focus on one skill. One artisan per piece gives you an object with a single maker behind it.
Steel: T12 or 12C27?
Both are good knife steels, and in daily use you will notice the handle and the balance long before the steel. Forge's T12 is forged and hardened to around 56–57 HRC, according to its dealers. Laguiole en Aubrac's Sandvik 12C27 (used on all blades except the Damascus ones) is a stainless steel known for taking a fine edge and resisting rust, which matters for a corkscrew blade that meets wine and foil, or a steak knife that is washed after every meal. Laguiole en Aubrac steak knives all have smooth blades, never serrated, so they can be resharpened; check the model description for Forge's.
Range and handles
Forge de Laguiole offers a broad catalog of folding knives, corkscrews and table knives, and its designer and limited series are a real draw for collectors.
Laguiole en Aubrac's strength is the choice of handle. Over 20 woods, from olivewood, juniper and grapevine to ebony and burls; buffalo horn and solid horn; natural stones such as larimar, malachite and turquoise; and fossil mammoth ivory at the top. Because these are natural materials, no two handles are the same. See the full range on our compare pages for pocket knives, sommelier corkscrews and steak knives.
Price
For comparable pieces in the US, Laguiole en Aubrac is usually less expensive. A classic 12 cm (4¾") Laguiole en Aubrac pocket knife starts at $169.95, a sommelier corkscrew at $139.95, and a 6-piece steak set at $249.95. The Forge de Laguiole models we found at a US dealer in October 2026 were about $209–$249 for a 12 cm pocket knife, about $279 for a wood-handled corkscrew, and about $894 for a set of six horn-tip steak knives. Prices for both makers vary a lot with the handle material.
Which should you buy?
Buy Forge de Laguiole if you want the name of the village on the blade, a maker listed under the geographical indication, or a designer edition such as a Starck model.
Buy Laguiole en Aubrac if you want a piece made from start to finish by one artisan, a very wide choice of handle materials, a certificate in every box, and lower US prices for comparable models. It is also an easy gift to get right, because you can match the handle to the person.
Buy neither if the price looks too good. A genuine French handmade Laguiole pocket knife does not cost $30.
Common questions
Is Laguiole en Aubrac or Forge de Laguiole better?
Neither is better in every way. Forge de Laguiole, founded in 1987 in the village of Laguiole, is the best-known name, uses forged T12 steel and is listed under the "Couteau de Laguiole" geographical indication. Laguiole en Aubrac, founded in 1992 in Espalion, has one artisan make each piece from start to finish in Sandvik 12C27 steel, offers a very wide choice of handle materials, and is usually less expensive in the US.
Are both Laguiole en Aubrac and Forge de Laguiole made in France?
Yes. Forge de Laguiole is made in the village of Laguiole and Laguiole en Aubrac in Espalion, both in Aveyron, in the Aubrac region of France.
What steel does Forge de Laguiole use?
Forged T12 steel from the French steelworks Bonpertuis, hardened to about 56–57 HRC according to its dealers. Laguiole en Aubrac uses Sandvik 12C27 stainless steel (Damascus blades excepted).
Is Laguiole en Aubrac cheaper than Forge de Laguiole?
Usually, for comparable pieces in the US. In October 2026, a Laguiole en Aubrac 12 cm pocket knife started at $169.95 against about $209–$249 for a Forge de Laguiole 12 cm at a US dealer, and a 6-piece Laguiole en Aubrac steak set started at $249.95.
What is the "Couteau de Laguiole" geographical indication?
A geographical indication approved by France's INPI on October 18, 2024. It covers knives made to its rules in 24 communes of northern Aveyron by makers listed as operators, and Forge de Laguiole is one of them. The maker's name on the blade remains the first thing to check.
Who makes each Laguiole en Aubrac knife?
One artisan, from start to finish, in up to 216 operations depending on the model. Every item is unique, fully handcrafted, and comes with its certificate.
Where can I buy Laguiole en Aubrac in the USA?
At LaguioleEnAubracShop.com, the authorized USA Laguiole en Aubrac distributor.